ABOUT NANTE MACHINERY
After 20 years rapid development, NANTE and its parents company ZHONGJIAN Group has grown into a leading integrated solution provider for crane and crane components in China. Dedicated to the research and development of new lifting and handling technologies, we adopt innovative ideas and design in developing new products and services. Backed up by a wealth of industrial experience on lifting industry, We can provide to customer wide range of lifting equipment and components with scientific design, good safety, high performance, efficient operation and low maintenance cost. We are committed to help our clients to reduce investment cost, improve production efficiency, and economize energy consumption.
Specifications
can be used for Multipole conductor rail
safe, seamless, run smothly,high speed,low noise,powered way arbitrariness
Our Services
If samples are required, we can arrange for you.
If you buy a lot of our products, we will give you the discount.
If you are not clear about the installation, we can give a hand to help you solve the problem.
Product Description
| Type | Weight(kg) | Material | Rated Current |
| NCT-500 | 3.05 | Aluminum | 500Amp |
| NCT*2-500 | 6.01 | Aluminum | 1000Amp |
| Unipole Conductor Rail system NSP-H Series |
| Conductor rail | Aluminium | Copper |
| Type | H19 | H24 | H32 | H24 | H32 |
| Nominal current at 100% DC and 35°C [A] | 150 | 250-300 | 320-1250 | 500-800 | 800-1600 |
| D.C.resistance at 35°C [Q/km] | 0.376 | 0.2030.187 | 0.1530.046 | 0.1160.067 | 0.670.0.39 |
| Impendance at 35C [Q/km] | 0.376 | 0.2090.195 | 0.1550.048 | 0.1180.069 | 0.0690.04 |
| Support spacing [m] | 1.8 | 1.5 | 1.8 | 1.5 | 1.8 |
| Rail length [m] | 4/6 | 4/6 | 4/6 | 4/6 | 4/6 |
| Housing length [m] | 3.88/5.88 | 3.88/5.88 | 3.83/5.83 | 3.88/5.88 | 3.83/5.83 |
| Max.voltage [V] | 660V | Dielectric strength [KV/mm] | 30-40 |
| Travelling speed | ≤600 m/min | standard | GB7251.2-2006 |
| Expansion joint | Only required when total length≥200m |
| Flame retardant | Class B1-no flaming particles, self-extinguishing |
| Permissible ambient temperature | Standard insulation -20℃- +70℃
High temperature insulation -10℃- +115℃ |
Carbon brush, also known as brush, as a sliding contact, in many electrical equipment has been widely used. Carbon brush in the product application materials are mainly graphite, dipped in graphite, metal (including copper, silver) graphite. A device that transfers energy or signals between a fixed part of a motor or generator or other rotating machine. It is usually made of pure carbon and coagulant. The exterior is usually a square, stuck on a metal bracket, inside There is a spring to press it on the shaft, the motor rotation, the power through the inverter delivery to the coil, because its main component is carbon, called carbon brush, it is easy to wear. Should be regularly replaced and clean up the carbon.
Is the motor or generator or other rotating machinery and the rotating part of the fixed part of the transfer of energy or signal between the device, which is generally made of pure carbon coagulation agent, the appearance is generally box, stuck in the metal bracket, there are springs Press it on the shaft, such as oil drilling is completed, the need for testing, it is necessary to put the instrument from the wellbore down, that is, through the carbon brush signal from the rotating part of the (cable wire drum) to the ground instrument. The look of the carbon brush is like a rubber band with a pencil, and there is a wire on the top. The volume is very small. Carbon brushes as a sliding contact, in many electrical equipment has been widely used. Product materials are mainly electro-graphite, dipped in graphite, metal (including copper, silver) graphite.
Product Tags:
|
|
Aluminum NCT-500 / NCT*2-500 Carbn Brush for NSP-H32 Conductor Rail Accessories Images
|
